EasyManuals Logo
Home>Grandstream Networks>Telephone Accessories>HT814

Grandstream Networks HT814 User Manual

Grandstream Networks HT814
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
P a g e | 32
HT812/HT814 User Guide
Version 1.0.15.4
2. Phone A dials the phone C’s number followed by # (or wait for 4 seconds).
3. If phone C answers the call, phones A and C are in conversation. Then A can hang up to complete
transfer.
4. If phone C does not answer the call, phone A can press “flash” to resume call with phone B.
Note: When attended transfer fails and A hangs up, the HT812/HT814 will ring back user A to remind A that
B is still on the call. A can pick up the phone to resume conversation with B.
3-Way conferencing
The HT812/HT814 support Bellcore style 3-way Conference. To perform the 3-way conference, we assume
that the call is established between phone A and B are in conversation. Phone A(HT812/HT814) wants to
bring third phone C into conference:
1. Phone A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial
tone.
2. Phone A dials C’s number then # (or wait for 4 seconds).
3. If phone C answers the call, then A presses FLASH to bring B, C in the conference.
4. If phone C does not answer the call, phone A can press FLASH back to talk to phone B.
5. If phone A presses FLASH during conference, the phone C will be dropped out.
6. If phone A hangs up, the conference will be terminated for all three parties when configuration
“Transfer on Conference Hang up” is set to “No”. If the configuration is set to “Yes”, A will transfer
B to C so that B and C can continue the conversation.
Call Return
In order to call back to the latest incoming number.
1. Pick up the handset of the connected phone (Off-hook).
2. After hearing the dial tone, input “*69”.
3. Your phone will automatically call back to the latest incoming number.
Note: All star codes (*XX) related features mentioned above are supported by ATA default settings. If your
service provider provides different feature codes, please contact them for instructions.
Voice Mail
VM Notification
The HT812/HT814 indicates new voice mail messages using Phone LEDs and Stutter Tone.
The Phone LEDs on HT812/HT814 will start blinking slowly when a new voice mail message is available
on corresponding account.

Table of Contents

Other manuals for Grandstream Networks HT814

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks HT814 and is the answer not in the manual?

Grandstream Networks HT814 Specifications

General IconGeneral
BrandGrandstream Networks
ModelHT814
CategoryTelephone Accessories
LanguageEnglish

Related product manuals