HT81X Technical Specifications
The following table resumes all the technical specifications including the protocols/standards supported,
voice codecs, telephony features, languages and upgrade/provisioning settings for the HT81X.
Table 2: HT81X Technical Specifications
Two (2) RJ11 FXS ports for HT812.
Four (4) RJ11 FXS ports for HT814.
Eight (8) RJ11 FXS ports for HT818
Two (2) 10/100/1000 Mbps Ethernet port (RJ45).
POWER, LAN, WAN, PHONE1 and PHONE2 for HT812.
POWER, LAN, WAN, PHONE1, PHONE2, PHONE3 and PHONE4 for HT814.
POWER, LAN, WAN, PHONE1, PHONE2, PHONE3, PHONE4, PHONE 5,
PHONE 6, PHONE 7 and PHONE 8 for HT818.
Caller ID display or block, call waiting, flash, blind or attended transfer,
forward, hold, do not disturb, 3-way conference.
G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B,
G.726, iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation.
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711
for Fax Pass-through.
Short/Long Haul Ring
Load
- 3 REN, up to 1km on 24AWG line for HT812.
- 2 REN, up to 1km on 24AWG line for HT814 and HT818.
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID.
Busy Tone, Polarity Reversal/Wink, Loop Current.
TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP,
TFTP, SSH, STUN, SIP (RFC3261), SIP over TCP/TLS, SRTP, TR-069.
Layer 2 (802.1Q VLAN, SIP/RTP 802.1p) and Layer 3 (ToS, Diffserv, MPLS).
In-audio, RFC2833 and/or SIP INFO.
HTTP, HTTPS, SSH, TFTP, TR-069, secure and automated provisioning using
TR069, syslog.
Syslog support, SSH, remote management using web browser.