Grandstream Networks HT818 - Changing User Level Password; Changing HTTP Web Port; Figure 9: Admin Level Password; Figure 10: User Level Password

P a g e | 23
HT81x User Guide
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings  New Admin Password and enter the new admin password.
5. Confirm the new admin password.
6. Press Apply at the bottom of the page to save your new settings.
Figure 9: Admin Level Password
Changing User Level Password
1. Access your HT81X web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings  New End User Password and enter the new end-user password.
5. Confirm the new end-user password.
6. Press Apply at the bottom of the page to save your new settings.
Figure 10: User Level Password
Changing HTTP Web Port
1. Access your HT81X web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings  HTTP Web Port.
5. Make sure that the Web Access Mode is set to HTTP.
6. Change the current port to your desired/new HTTP port. Ports accepted are in range [1-65535].
7. Press Apply at the bottom of the page to save your new settings