EasyManuals Logo
Home>Grandstream Networks>Telephone Accessories>HT818

Grandstream Networks HT818 User Manual

Grandstream Networks HT818
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
P a g e | 21
HT81x User Guide
Five success tips when using the voice prompt
“*” shifts down to the next menu option and “#returns to the main menu
“9” functions as the ENTER key in many cases to confirm or toggle an option.
All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP
address. For IP address, add 0 before the digits if the digits are less than 3 (i.e. - 192.168.0.26
should be key in like 192168000026. No decimal is needed).
Key entry cannot be deleted but the phone may prompt error once it is detected.
Note: Please make sure to reboot the device after changing network settings (IP Address, Gateway,
Subnet…) to apply the new configuration.
Configuration via Web Browser
The HT81X embedded Web server responds to HTTP GET/POST requests. Embedded HTML pages allow
a user to configure the HT81X through a web browser such as Google Chrome, Mozilla Firefox and
Microsoft’s IE.
Microsoft Internet Explorer: version 10 or higher.
Google Chrome: version 58.0.3 or higher.
Mozilla Firefox: version 53.0.2 or higher.
Safari: version 5.1.4 or higher.
Opera: version 44.0.2 or higher.
Accessing the Web UI
- Via WAN port
For the initial setup, the Web access is by default enabled when the device is using private IP and disabled
when using public IP, and you cannot access the Web UI of your HT81X until it’s enabled, the following
steps will show you how to enable it via IVR.
1. Power your HT81X using PSU with the right specifications.
2. Connect your analog phone to phone ports (FXS) of your HT81X.
3. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter
the menu option “.
4. Press 12, the IVR menu will announce that the web access is disabled, press 9 to enable it.
5. Reboot your HT81X to apply the new settings.
Please refer to steps below if your HT81X is connected via WAN port:
1. You may check your HT81X IP address using the IVR on the connected phone.
Please see Obtain the HT81X IP address via the connected analogue phone

Table of Contents

Other manuals for Grandstream Networks HT818

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks HT818 and is the answer not in the manual?

Grandstream Networks HT818 Specifications

General IconGeneral
BrandGrandstream Networks
ModelHT818
CategoryTelephone Accessories
LanguageEnglish

Related product manuals