UPGRADING AND PROVISIONING
The HT81X can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP or
HTTP/HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
fw.ipvideotalk.com/gs
Firmware Upgrade procedure
Please follow below steps in order to upgrade the firmware version of your HT81X:
1. Access your HT81X UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings Firmware Upgrade and Provisioning page, and enter the IP
address or the FQDN for the upgrade server in "Firmware Server Path" field and choose to
upgrade via TFTP or HTTP/HTTPS.
5. Make sure to check “Always Check for New Firmware”.
6. Update the change by clicking the " Apply" button at the bottom of the page. Then "Reboot" or
power cycle the HT81X to update the new firmware.
Figure 15: Firmware Upgrade Page
To Next Page
Loading...
Need help?
General
