Grandstream Networks UCM63 Series Basic Configuration Guide

P a g e | 24
UCM6XXX Basic Configuration Guide
 Click on to delete the VoIP trunk.
There are 4 different type of VoIP trunks that can be configured. The types are Peered/Registered SIP trunk or
Peered/Registered IAX trunk. This tutorial will demonstrate how to configure a SIP Registered Trunk.
Set up VoIP Trunk
1. Click on “Add” to “Create New SIP Trunk”.
2. Click the dropdown box for Type and select “Register SIP Trunk”.
3. Enter a name for “Provider Name” e.g., GSTrunk.
4. Configure the IP address or URL of the VoIP providers server as the “Host Name” e.g.,
sip.grandstream.com.
5. Input the username to authenticate with the VoIP provider as the “Username” e.g, 6266389172.
6. Enter password for username to authenticate with VoIP provider server.
7. Enter the AuthID. This is the SIP service subscriber’s ID used for authentication. If not configured, the
CallerID will be used for authentication.
8. Enter an outbound proxy if the provider requires one.
9. Click “Save” and then “Apply Changes” at the top

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English