Grandstream Networks UCM630 A Series - Prerequisite; Figure 1: UCM Remoteconnect Page; Figure 2: GDMS PBX Device Page

UCM630xA Series: RemoteConnect User Guide
Version 1.0.7.9
P a g e | 11
PREREQUISITE
The UCM RemoteConnect service on UCM630xA series must be used with Grandstream Device
Management System (GDMS). Before the UCM is connected with GDMS, the RemoteConnect information
displays as below on UCM630xA web GUI→Value-added Features→UCM RemoteConnect page.
Figure 1: UCM RemoteConnect Page
Before using the service, please log in your GDMS account. If you do not have GDMS account, please sign
up here and then log in: https://www.gdms.cloud/login
On GDMS platform, sign in and go to Device→PBX Device page, click on “Add Device” to add your
UCM630xA device to GDMS system. Please refer to section “Managing UCM630xA on GDMS→Add UCM
Device” for more details.
Figure 2: GDMS PBX Device Page