Preselected values in servicemenu 3.0
ex
no.
Text Flexi Maxi MaxiSH Gastro GC
32. Eco wash time 1:00 1:00 1:00 1:00 1:00
33. Short wash time 3:00 3:00 3:00 2:00 2:00
34. Normal wash time 5:00 5:00 5:00 4:00 4:00
35. Eco fine wash time 1:00
36. Short fine wash time 1:30
37. Normal fine wash time 2:00
38. Separation time 1:00 1:00 1:00 0:30 0:40
39. Time control the rinse pump Potwash Eco YES YES YES YES YES
40. Time control the rinse pump Potwash Other NO NO NO NO NO
41. Eco Rinse time 0:20 0:20 0:20 0:20 0:20
42. Other Rinse time 0:40 0:40 0:40 0:40 0:40
43. Eco fine Rinse time 0:20
44. Other fine Rinse time 0:20
45. Steam reduction equipment YES YES YES NO NO
46. Steam reduction time Eco-program 0:00 0:00 0:00 0:00 0:00
47. Steam reduction time Other program 1:00 1:00 1:00 0:30 0:30
48. Steam reduction time Fine Eco-program 0:00
49. Steam reduction time Fine Other program 0:20
50. Wash tank temperature 65 65 65 65 65
51. Rinse tank temperature 85 85 85 85 85
52. Temperature block in the wash tank YES YES YES YES YES
53. Temperature block in the rinse tank YES YES YES YES YES
54. Type of rinse aid dosage
Per cycle Per cycle Per cycle Per cycle Per cycle
55. Sensitivity on level detectors 500 500 500 500 500
56. Prescavenging at program start Interval NO NO YES NO
57. Impulse time on the pump during prescavenging 200 200 200 200 200
58. Alarm Low water level 0:20 0:20 0:20 0:20 0:20
59. Alarm Wash temperature not reached 0:30 0:30 0:30 0:30 0:30
60. Alarm Rinse temperature not reached 0:15 0:15 0:15 0:15 0:15
61. Alarm Long fill time in the wash tank 0:20 0:20 0:20 0:20 0:20
62. Alarm Long fill time in the rinse tank 0:05 0:05 0:05 0:05 0:05
63. Change water after 0:20 0:20 0:20 0:20 0:20
64. Run test program
65. Load factory settings
66. Value on the level sensors
67. Read operation data
68. Read accumulated values
To Next Page
Loading...
