5. The electrical connections in the electrical cabinet must be tightened before the
input electricity supply is connected. Connect the electrical cable to the main switch
on the wall. Check that the power supply complies with the Technical Data on the
rating plate.
Detergent and rinse aid installation
To obtain the best performance of this GRANULDISK pot washer we strongly
recommend to install a sensor controlled dosing equipment and also install
appropriate rinse aid.
The machine does not need to be moved, but remove the front cover
and the right side cover
The 230V and the 24V supply as well as the control signals for the detergent and
rinse agent equipment are located in the terminal box (A) on the
right side of the wash tank. There are terminal blocks as listed
below in the junction box (see pic):
1 Emergency stop J 8-8
2 Emergency stop J 8-3
3 Operations indication J 6-4
4 Central metering (full wash tank) J 8-5/TF
5 Rinse connection 24VAC J 8-4/R
6 Detergent connection 24 VAC J 8-9/D
7 Neutral 24 VAC J 16-12
8 Constant 24 VAC 113
A Earth PE
B Rinse connection 230 VAC
C Detergent connection 230 VAC J 1-7/D
D Neutral 230 VAC J 1-6
E Constant 230 VAC J 1-2
To Next Page
Loading...
