m. Fold up the linear motor and fasten it to the arm again with nut and
screw.
n. Hook up the spring again.
8. Remount the cover plates and refit the tank grids.
Service instructions GD Gastro/GranuleCombi 2 year service. (16000 Cycles).
1. Note serial number of the machine.
2. Perform 1 year service (8000 h service) according to this manual.
3. Replace the hood seal:
a. Open the hood and secure with the safety pin.
b. Undo the screws holding the support lists a few turns.
m
To Next Page
Loading...
