2 Operating
2.1 Start up procedure
22 Press the Confirm (1) button in order to fill the wash tank.
Fill wash tank?
33 The program selection diodes flash out of sequence with the diodes for
washing with or without granules during filling.
XX °C XX°C
Filling the wash
tank
44 Filling and heating takes about 15 minutes (if hot water connection, +55°
C, water pressure 1-6 bar with 15 litre flow when magnetic valve is
opened). For optional cold water connection (+10 to 12°C), filling and
heating take about 30 minutes. If the correct temperature has not been
attained in the wash tank after filling, the following message is
displayed
50°C 60°C
Heating the
wash tank, 65°C
55 Ready to use when the cor-
rect temperature has been
attained in the wash tank.
A pre-selected program is
now displayed;
65°C 70°C
Eco program
with granules
wash time: 2:30
NOTE
RED LAMP; indi-
cates that the
machine is work-
ing. Do not open
the door!
GREEN LAMP; indi-
cates that the
machine is ready
for use
18 Rev. 2021-12
To Next Page
Loading...
