3 Daily cleaning 3.2 Cleaning inside the machine
Fig. 26 Items to clean
55 Lift out overflow sieve (A) and
Granule valve cover (B).
Clean and flush the parts with
water.
See Fig. 26 Items to clean
• Overflow sieve; remove the
cover.
• Granule valve; remove the
cover by pulling handle
straight up.
66 Wash inside of the machine with water (no cleaning agent).
77 Wipe off the level sensor (C) with a clean cloth.
See Fig. 26 Items to clean
88 The drip groove (D) is to be washed clean and dried in order to avoid
blockage in the drain channels.
See Fig. 26 Items to clean
99 Wipe door seals.
1100 Wipe inside of the doors with a damp cloth.
1111 The top should be wiped off when required or at least once a month.
Fig. 27 EcoExchanger
1122 If present, clean and flush the
EcoExchanger from the inside
of the cabin. The box on top
of the roof will be cleaned by
a service technician when
servicing the machine —
every 10.000 cycle.
When the machine is calling
for periodical service (mes-
sage in display), the interior
of the heat exchanger will be
cleaned by the service tech-
nician doing the regular pre-
ventive service.
See Fig. 27 EcoExchanger
34 Rev. 2021-12
To Next Page
Loading...
