3 Daily cleaning 3.2 Cleaning inside the machine
Fig. 30 Refitting of spray pipe
33 Make sure the spray pipes
are secured properly. Press
the spray pipe in and turn it
clockwise. Ensure and secure
by gently pulling it outwards.
If difficult, take out the spray
pipe, remove any granules or
if the seal may be dry, damp-
en it with a little water and try
again.
See Fig. 30 Refitting of spray
pipe
NOTE
Never use force to
fit the spray
pipes!
36 Rev. 2021-12
To Next Page
Loading...
