2
Introduction
The PT 335B Multi is a versatile automatic creaser with multiple finishing options; cross perforating (with the
capability to do partial perfs), choice of three creasing widths, and an array of rotary tools; perforating,
scoring, slitting, and kiss-cutting. Equipped with a 4” vacuum pile feeder, an easy to use LCD screen and
keyboard, skew compensation, and sheet size up to 13” x 25.5”. With a maximum of 32 crease/perf positions
per sheet, 30 job memory, and speeds up to 4,500 SPH, the PT 335B Multi is a capable and affordable
finishing option.
Important Information
This manual is designed to help you operate the PT 335B Multi. Please read, understand, and keep this
manual in a convenient place for easy access.
DO NOT operate the PT 335B Multi until you have read and understand the instructions in this manual. If
you have any questions, contact your local dealer or Graphic Whizard before operating this machine.
Graphic Whizard shall not be held liable for consequential damages or incidental consequential damages
resulting from: improper or inadequate maintenance by the customer; unauthorized modifications or
misuse; or operation outside of the environment specified for the machine.
Graphic Whizard is committed to continually improving the design and performance of the product line.
Please note: the design and specifications of this machine are subject to change without notice and without
legal obligation.
All rights are reserved. No part of this manual may be photocopied, reproduced, or translated to another
language without the prior written consent of Graphic Whizard.
To Next Page
Loading...