Graphic Whizard PT 335B Multi - Installation; Uninstall the Protection Bar; Exit Tray, Stops and Guides

7
Installation
Uninstall the Protection Bar
Ensure all brackets are removed for shipping purposes (see images below). There should not be any brackets
installed holding the feed table down once set up begins. During shipping there will be a support bar installed
across the feeding table, as well as a small bracket holding the table down. Please remove both.
Exit Tray, Stops and Guides
Unpack and install the parts as per illustration below.
Note
:
Guide an
d stops will be determined by paper size.
Side Guide
R/H
Side Guide
L/H
Exit
Tray
Insert
Exit
Tray
Back Stop
Extension
Tray