21
Hardware Setting
Crease Depth
Crease depth is important to overall crease quality. Depth should be adjusted according to the
paper thickness. Low depth will perform an unclear crease, but a heavy depth may cause
cracking, or cause the system to take it as a double feed. An adjustment is also needed if the
crease depths are not balanced on both sides.
To adjust the depth:
1. Open the safety cover.
2. Find 4 screws on both sides, turn the Allen screws as shown above to make the crease line
deeper or lighter.
3. DO NOT EVER adjust 3rd screw in the middle.
To Next Page
Loading...