GRAPHTEC CE7000-40 - Page 282

13-28
When using Graphtec Pro Studio
1
Click on the "Cut Contour" icon.
Supplement
When the "Cut Contour" screen is displayed
for the rst time, the "Add Device" screen is
displayed. Follow the instructions on the screen
to select the model name to use.
•
For USB connection, select the "Graphtec
USB".
•
For network connection, select the "TCP/IP"
and then enter the IP address of the cutting
plotter.
•
The explanation here is limited to using a
personal computer instead of the server for
the data link server.
2
The "Cut Contour" screen is displayed.
Select the "Hold in list" from the "Send mode".
Press the "Send".
3
Switch to Production Manager.
Conrm that the sent le is held in the "Hold" item.