GRAPHTEC CSX300-09 - Page 14

IV
3.3 Handling Documents According to their Material and Thickness ...................................3-4
3.4 Distance Correction........................................................................................................3-5
3.5 Using the Carrier Sheet..................................................................................................3-6
CHAPTER 4 DAILY MAINTENANCE
4.1 Opening and Closing the Top Cover...............................................................................4-1
4.2 Cleaning the Feed Rollers..............................................................................................4-2
4.3 Cleaning the Document support Rollers ........................................................................4-3
4.4 Cleaning the Gap Rollers ...............................................................................................4-4
4.5 Cleaning the Push Rollers..............................................................................................4-5
4.6 Cleaning the Image Sensors (Transparent Contact Plates) ...........................................4-6
4.7 Cleaning the Sensors .....................................................................................................4-7
4.8 Removing a Jammed Document ....................................................................................4-8
4.9 Scanner Calibration........................................................................................................4-9
Preparation and checks ..............................................................................................4-9
Launching the Scanner Adjustment Program .............................................................4-9
Calibration.................................................................................................................4-10
CHAPTER 5 TROUBLESHOOTING PROCEDURES
5.1 The scanner Is turned on but doesn’t operate at all .......................................................5-1
5.2 The scanner operates improperly after connection to the computer ..............................5-1
5.3 The control panel’s red ERROR LED is lit......................................................................5-1
5.4 The control panel’s red ERROR LED is flashing ............................................................5-2
5.5 The document isn’t properly fed to the initial scanning position .....................................5-2
5.6 The scanned image data is completely white or completely black.................................5-2
5.7 The image quality has dropped ......................................................................................5-2
5.8 The scanned data is incorrectly aligned .........................................................................5-3
5.9 Smudges not appearing in the original document appear in the scanned data .............5-3
5.10 The color intensity of the image data differs ..................................................................5-3
5.11 The document length differs from the scanned data length ...........................................5-4
5.12 Stripes or moire patterns which are not
in the original document appear in the scanned data .................................................5-4
5.13 The scanned image data is distorted .............................................................................5-4
5.14 The scanned image data is patchy ................................................................................5-4
5.15 The document cannot be fed correctly ...........................................................................5-4
APPENDIX
Appendix A Options and Consumables ................................................................................... A-1
Appendix B Specifications ....................................................................................................... A-2
Appendix C External Dimensions ............................................................................................ A-3
INDX ................................................................................................................................................I-1