Need help?Do you have a question about the GRAPHTEC FC9000 Series and is the answer not in the manual?
General| Repeatability | ±0.1 mm |
|---|---|
| Model | FC9000-100, FC9000-160 |
| Max Cutting Width | 1626 mm (64 in) |
| Maximum Cutting Speed | 1485 mm/s (58.5 ips) |
| Cutting Force | 50-500 gf |
| Media Width | Up to 1370 mm (54") |
| Connectivity | USB, Ethernet |
| Display | LCD |
| Software Compatibility | Graphtec Pro Studio, Graphtec Studio, Cutting Master 4 |
| Media Type | Reflective film |
| Mechanical Resolution | 0.005 mm |
| Programmable Resolution | 0.025 mm |
| Command Sets | GP-GL, HP-GL |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Media Thickness | 0.1 to 1.0 mm |
| Compatible Media | Card stock |
To Next Page
