Need help?Do you have a question about the GRAPHTEC FC7000MK2-130 and is the answer not in the manual?
General| Model | FC7000MK2-130 |
|---|---|
| Category | Plotter |
| Manufacturer | Graphtec |
| Type | Cutting Plotter |
| Drive Method | Servo Motor |
| Max Cutting Width | 1300 mm |
| Max Cutting Speed | 1000 mm/s |
| Cutting Speed | 10 - 1000 mm/s |
| Repeatability Precision | ±0.1 mm |
| Repeatability | ±0.1 mm |
| Interface | USB 2.0 (Full Speed), Ethernet |
| Weight | 67 kg (148 lbs) |
| Maximum Cutting Area | 1300 x 50 m |
| Max Media Width | 1370 mm |
| Cutting Force | 600 gf |
| Pen Force | 30-500 gf |
| Programmable Resolution | 0.025 mm |
| Media Type | Vinyl, Paper, etc. |
| Command Sets | HP-GL |
| Power Supply | AC 100-240V |
| Operating Environment | 10 - 35 °C, 30 - 80 % RH |
Details specifications for FC7000 and FC7000MK2 series plotters.
Provides physical dimensions of the plotter models.
Identifies and describes key components of the plotter.
Instructions for assembling the plotter and its accessories.
Guide for attaching the optional FC7000 basket.
Procedure for mounting cutter pens into the plotter.
Steps for replacing the cross-cutter unit.
Explains the functions of buttons and indicators on the control panel.
Overview of the plotter's menu structure and navigation.
Details various background settings and their functions.
Step-by-step guide to configuring background settings.
Lists necessary tools for maintenance and adjustments.
Specifies lubrication points and recommended grease/glue.
Procedures for disassembling and reassembling external components.
Instructions for disassembling and reassembling mechanical parts.
Identifies components that need readjustment after replacement or alteration.
Procedures for mechanical adjustments like belt tension.
Procedures for electrical adjustments and settings.
Guide for updating the plotter's system firmware.
Checks the status of various sensors on the plotter.
Tests the functionality of control panel switches.
Solutions for when the plotter fails to power on or operate.
Troubleshooting tips for media loading issues.
Solutions for problems encountered during cutting operations.
Explains error codes and their causes/solutions.
Lists external housing and structural parts for the plotter.
Lists components related to the plotter's control interface.
Lists parts comprising the pen carriage and related mechanisms.
Lists structural components of the plotter's chassis.
Lists parts associated with the Y-axis movement system.
Lists parts for the component that moves along the Y rail.
Lists various electrical cables and connectors.
Lists identification labels and warning stickers.
Lists parts for the media support stand and rollers.
Lists parts for the optional media basket accessory.
Lists standard accessories and packing materials.
High-level functional diagrams of the plotter's architecture.
Detailed electronic schematics for the main board and other circuits.
Specific circuit diagrams for the FC7000MK2 main board.
To Next Page