Need help?Do you have a question about the GRAPHTEC FC3100-120 and is the answer not in the manual?
General| Model | FC3100-120 |
|---|---|
| Repeatability Precision | ±0.1 mm |
| Number of Tools | 1 |
| Maximum Media Length | 25000 mm |
| Maximum Cutting Speed | 1000 mm/s (45° direction) |
| Cutting Speed | 1000 mm/s (45° direction) |
| Cutting Force | 50 to 500 gf |
| Resolution | 0.025 mm |
| Mechanical Resolution | 5 μm |
| Programmable Resolution | 0.025 mm |
| Compatible Media Types | Reflective Film |
| Interface | USB |
| Command Sets | HP-GL, GP-GL |
| Power Supply | AC 100 to 240 V, 50 / 60 Hz |
| Weight | 73 kg |
Safe handling of sharp cutting blades to prevent personal injury.
Proper handling of cutter pens, including tip protection and storage.
Details the function of each button and indicator on the plotter's control panel.
Describes different cutter blade types and their specific features and applications.
Step-by-step instructions for safely replacing the cutter blade.
Explains setting cutting parameters and performing a cutting test.
Tips and settings for obtaining the best possible cutting quality.
Adjusts blade offset angle and cutting pressure for optimal results.
Guides for resolving issues like plotter non-operation or poor cutting results.
Explains mechanical and command error messages, their causes, and solutions.
To Next Page