4 / 25
1. Product Information
Tera Harz Cure is a product made to completely cure the output printed from a 3D printer using
UV LED. It is designed to minimize the variation of light quantity over a wide area by optimizing
the arrangement of UV LED irradiated on the curing surface, and it can be effectively cured with
high light quantity. Nitrogen Generator, which can be used exclusively for Tera Harz Cure products,
converts the compressed air from the air compressor into 95% or more nitrogen and supplies it
to the equipment. to cover the print with nitrogen to block oxygen on the surface, increase the
illuminance and physical properties of the print with high light intensity, and reduce water
absorption.
To Next Page
Loading...