Graphy Tera Harz Cure - Operation and Curing; Normal Curing (Without Using a Nitrogen Generator)

16 / 25
6. Operation and Curing
□ Normal Curing (without using a nitrogen generator)
Open the door and put the curing object on the tray plate and put it into the equipment..
Caution
When placing it on the equipment, the protrusions and the grooves of the inner plate must
be aligned so that slippage does not occur during rotation at curing.
Intro page : Touch anywhere on the INTRO screen shown on the equipment's LCD.
Example)
8 aligners placement