GRASS VALLEY ADVC3000 - Recording PC-Edited Data Onto a Tape with VCR

Chapter 2 - Basic Operations
29
2-3. Recording PC-edited data onto a tape with VCR
Output the DV data from a PC and record it with a VCR.
PC
(DV connector)
Display
When outputting the data
via DV editing software
VCR with SDI
input/output
Speaker
Monitor
ADVC3000
(DV connector)
Digital
Analog
Analog
SDI
SDI
VIDEO IN
PRESET
AUDIO IN
COMPONENT
COMPOSITE
S VIDEO
SDI
BALANCED
AES/EBU
SDI/ANALOG?DV
DV?SDI/ANALOG
UNBALANCED
ANALOG AUDIO
INPUT LEVEL
Engineered by Canopus
Analog
VCR with
component
input/output
Press the MODE button on the front panel of the ADVC3000 to switch the mode to the [DV
 SDI/ANALOG].
1
Use the DV editing software to output your data.
* For the operational procedure of the DV editing software, refer to the instruction manual provided with your
DV editing software.
2
Use the VCR to record the data on tape.
3
8+
&
5&+#0#.1)ă&8
&8ă5&+#0#.1)
Light
8+&
'
5&+#0#.1)ă&8
&8ă5&+#0#.1)
Press
31