Chapter 2 - Basic Operations
52
301 TC source
DV encoding time code settings
LCD display
Acquires time code from DVITC of the SDI input connector.
*Incompatible with VITC from the analog video input connector.
Acquires time code from LTC of the TC input connector.
Acquires time code from DVITC in SDI input and LTC. Adopts LTC if LTC
is acquired, adopts DVITC only if not.
(Factory default)
Reads the time code from the deck in SDI/
ANALOGDV mode.
54
205 600 ohm term.
Balanced audio (XLR) input termination
LCD display
Press the Select dial to move the cursor, and press the Select dial
to change ON/OFF alternately.
ON
600j termination
OFF High impedance
Sets the termination at the balanced audio (XLR) input
connector.
To Next Page
Loading...
