GRASS VALLEY ADVC3000 - Audio out Delay Setting; Video out Delay Setting; Video Output Synchronizing Signal Settings

Chapter 2 - Basic Operations
49
109 Vout ref. select
Video output synchronizing signal settings
LCD display
Synchronizes with the chosen video signal.
(Factory default)
Synchronizes with the sync signal to be input through REF IN connector.
Selects the source to be used as sync signal in SDI/
ANALOGDV mode.
51
110 Vout ref. conf.
Video out delay setting
LCD display
Set specifi ed numerical value between -1024 and 1023.
(Factory default: 0)
Sets the amount (in unit of 37 nanoseconds) to
increase/decrease the ADVC3000 video output delay
(system phase) relative to the synchronization source
in SDI/ANALOGDV mode.
111 Vout audio delay
Audio out delay setting
LCD display
Set specifi ed numerical value between -100 and 100 msec.
(Factory default: 0)
Sets the amount (in unit of milliseconds) to increase/
decrease the ADVC3000 audio output delay relative to
the video output, when the external sync is enabled in
SDI/ANALOGDV mode.
*When “108 DVout frame sync” is set to disable, the DV output
data is not delayed.