GRASS VALLEY ADVC3000 - Video Output Auto-Off Settings

Chapter 2 - Basic Operations
44
103 Vout auto-off
Video output auto-off settings
LCD display
Press the Select dial to display the sub-menu.
In the sub-menu, turn the Select dial to set the item.
Sub-menu
Specifi es the SDI output setting.
output Does not stop outputting video signal.
(Factory default)
auto-off
Stops outputting video signal.
Specifi es the component output setting.
output Does not stop outputting video signal.
(Factory default)
auto-off
Stops outputting video signal.
Specifi es the composite output setting.
output Does not stop outputting video signal.
(Factory default)
auto-off
Stops outputting video signal.
Specifi es the S-video output setting.
output Does not stop outputting video signal.
(Factory default)
auto-off
Stops outputting video signal.
Specifi es the output connector that automatically
stops the video output in SDI/ANALOGDV mode.
When the reference signal is not used, set this option
to [auto-off] to prevent a looped connection with a
connected device.
46