GRASS VALLEY ADVC3000 - DV Output Aspect Ratio Settings

Chapter 2 - Basic Operations
46
105 DV aspect info
DV output aspect ratio settings
LCD display
For NTSC
Sets the DV stream in 4:3 aspect ratio. (Factory default)
Sets the DV stream in16:9 aspect ratio (letter box).
Sets the DV stream in16:9 aspect ratio (squeeze).
For PAL/SECAM
Sets the DV stream in 4:3 aspect ratio. (Factory default)
Sets the DV stream in16:9 aspect ratio (letter box).
Sets the DV stream in16:9 aspect ratio (anamorphic).
* This is effective only when the DV device to which the signals are output is compatible with the aspect signal of
DV standard.
Specifi es the aspect ratio for the DV stream that
ADVC3000 outputs in SDI/ANALOGDV mode.
48