Chapter 2 - Basic Operations
53
55
302 VITC insert line
DVITC settings
LCD display
Press the Select dial to display the sub-menu. In the sub-menu,
turn the Select dial to select the line.
Sub-menu
Sets the line (line 1) in which to insert DVITC in SDI output.
line ××
NTSC: 10 to 20 (Factory default: 16)
PAL: 6 to 22 (Factory default: 19)
off
Will not be inserted.
Sets the line (line 2) in which to insert DVITC in SDI output.
line ××
NTSC: 10 to 20 (Factory default: 18)
PAL: 6 to 22 (Factory default: 21)
off
Will not be inserted.
Sets the line in which to read DVITC from SDI input in SDI/ANALOG
DV mode.
line ××
NTSC: 10 to 20
PAL: 6 to 22
auto detect
Detects automatically. (Factory default)
Selects the line at which DVITC is inserted in SDI
output or the line at which DVITC is read from SDI
input.
To Next Page
Loading...
