Chapter 2 - Basic Operations
40
saturation Adjusts color strength. The smaller the value is, the lighter the color is; the larger,
the darker. You can reproduce complete gray-scale with minimum value 0 (zero).
Set specifi ed numerical value between 0 and 255.
(Factory default: For composite/S video)
NTSC 0 IRE: 128, 7.5 IRE: 138, PAL:128, SECAM:128
(Factory default: For component)
NTSC Betacam 0 IRE:148, 7.5IRE:160, SMPTE:148, PAL:213, SECAM:213
sharpness Adjusts sharpness of image outline. The smaller the value is, the more blur image
outline is; the larger, the sharper.
Set specifi ed numerical value between 0 and 255. (Factory default: 128)
component level Specifi es the component level (NTSC/component only)
Betacam Sets Betacam (Factory default)
SMPTE Sets SMPTE.
3D visual
processing
Sets the effects for 3D noise reduction and 3D video processing. (NTSC only)
(Available only to composite or S-video)
none Disables the 3D noise reduction. (Factory default)
3D Y/C Enables 3D Y/C. (composite only)
3D NR (low) Enables low 3D noise reduction fi lter.
3D NR
(middle)
Enables medium 3D noise reduction fi lter.
3D NR (high) Enables high 3D noise reduction fi lter.
2D Iuma NR Eliminates the noise on the luminance component by non-linear noise extract
fi lter.
none Disables the 2D luminance noise extract. (Factory default)
low Enables low 2D noise extract fi lter.
middle Enables medium 2D noise extract fi lter.
high Enables high 2D noise extract fi lter.
(Continued)
(Continued on the next page)
42
To Next Page
Loading...
