March 16, 2006 K2 Media Client Version 3.0.1.19 Release Notes 27
Rack mounting the control point PC drawer
Rack mounting the control point PC drawer
The pull out PC notebook drawer kit consists of two slide assemblies with front and rear
brackets fitted and a drawer. The kit does not include rack screws or cage nuts.
1. On both slide assemblies, release the inner rail from the outer slide as follows:
The plastic release lever moves up on the left-hand rail and down on the right-hand
rail. You might need a slotted screwdriver to move the plastic release lever.
2. Fasten the inner rails to the drawer with the screws provided. The screws are on the
drawer.
Move the plastic release lever
to release the inner rail.
To Next Page
Loading...
