July 3, 2007 K2 Storage System Instruction Manual 107
Creating a new file system
Creating a new file system
1. In Storage Utility, click Tools | Make New File System. The Setting dialog box
opens.
2. For the Real Time Input/Output (RTIO) rate, enter the value specified by your
system design. If you do not know this value, contact your Grass Valley
representative.
3. If the K2 Storage System is to be accessed by only K2 Media Clients you can leave
Windows Security unchecked. If accessed by Aurora Edits, refer to the Aurora Edit
Installation and Configuration Guide for instructions.
4. Click
OK. The Set Stripe Group dialog box opens.
5. If you have RAID 1 LUNS, assign a RAID 1 LUN as a metadata stripe and another
To Next Page
Loading...
