July 3, 2007 K2 Storage System Instruction Manual 161
Creating a new file system
NOTE: Make sure start up processes on the K2 Media Server are complete before
proceeding.
4. Continue with the next procedure “Creating a new file system”.
Creating a new file system
1. In Storage Utility, click Tools | Make New File System. The Setting dialog box
opens.
2. For the Real Time Input/Output (RTIO) rate, enter the value specified by your
system design. If you do not know this value, contact your Grass Valley
representative.
3. If the K2 Storage System is to be accessed by only K2 Media Clients you can leave
Windows Security unchecked. If accessed by Aurora Edits, refer to the Aurora Edit
Installation and Configuration Guide for instructions.
4. Click
OK. The Configuration File dialog box opens.
To Next Page
Loading...
