GRASS VALLEY K2 - Configuring the Server 1 A - Part 1

July 3, 2007 K2 Storage System Instruction Manual 203
Configuring the server 1A - Part 1
Your K2 Storage System appears in the tree view of the K2 System Configuration
application.
5. Continue with the next procedure.
Configuring the server 1A - Part 1
1. In the K2 System Configuration application tree view, select [PrimaryK2Server].
2. Click the
Configure button. The Configure K2 Server wizard opens.
Follow the on-screen text to configure the K2 Media Server for a Level 3R K2
Page 3
Review the information on this page and verify that you have correctly
defined your K2 Storage System.
For a Level 3R storage system you should have the following:
• Two Gigabit Ethernet switches
• Four K2 Media Servers
• The number and type of clients appropriate for your system.
Click
Finish. The Define New K2 Storage System wizard closes.
On this page… Do this…