July 3, 2007 K2 Storage System Instruction Manual 153
Defining a new K2 Storage System
4. Follow the on-screen text to define your Level 3 K2 Storage System, as described
in the following table.
On this page… Do this…
Page 1
Create a name for your Level 3 K2 Storage System and type it in the
Name box.
Select Level 3.
The Server redundancy option is unchecked and disabled.
Click Next
Page 2
Move clients into the Number of Devices box as appropriate for your
system.
You cannot change the number of K2 Media Servers or Ethernet
Switches, as these are pre-configured based on the level you selected in
the previous page.
Click
Next.
To Next Page
Loading...
