July 3, 2007 K2 Storage System Instruction Manual 289
K2 Media Server specifications
Dell 2950 PowerEdge server
Characteristic Specification
Processor Dual Core Xeon Processor 5140 4MB Cache, 2.33GHz,
1333MHz FSB
Memory 1 GB
Hard Drives 36GB RAID 1
(Two 36GB, SAS, 3.5-inch, 15K RPM Hard Drives)
Operating System Microsoft® Windows® Server 2003, Standard Edition
Fibre Channel Adapter GVG SCSI
iSCSI Adapter Qlogic SANblade 1-Gbps iSCSI dual-TOE PCI-X Host Bus
Adapter
Removable Media Drive 24X IDE CD-RW/DVD ROM Drive
(No Floppy Drive)
Communications Dual Embedded Intel Gigabit Server Adapter on
motherboard
Graphics ATI ES1000 with 16MB SDRAM
Form Factor 2U
Dimensions (with bezel) 75.68 cm (29.79") D x 44.7 cm (17.6") W x 8.656 cm
(3.38") H
Rack Weight 26.76kg (59 lb), maximum configuration
Rack Mount Sliding rails with rack ear kit
Rear Ports Two RJ-45, one 9-pin serial, two Universal Serial Bus
(USB) 2.0, Video, system status indicator connector, system
identification button, system status indicator
Front Ports Two Universal Serial Bus (USB) 2.0, NMI button, system
identification button, LCD panel, 15-pin video, system
power on/off button
Power 750W, hot-plug redundant power, 110/220 Volts
Cooling Hot-plug, redundant cooling fans
Operating Temperature 10° to 35°C (50° to 95°F)
Storage Temperature -40° to 65°C (-40° to 149°F)
Operating Relative Humidity 20% to 80% (non-condensing)
Storage Relative Humidity 5% to 95% non-condensing
Operating Vibration 0.25G at 3Hz to 200Hz for 15 minutes
Storage Vibration 0.5G at 3Hz to 200Hz for 15 minutes
Operating Shock 1 shock pulse of 41G for up to 2ms
Storage Shock 6 shock pulses of 71G for up to 2ms
Operating Altitude -16m to 3,048m (-50ft to 10,000ft)
Storage Altitude -16m to 10,668m (-50ft to 35,000ft)
To Next Page
Loading...
