July 3, 2007 K2 Storage System Instruction Manual 363
Backing up the media database
4. In the Back Up Database dialog box, the Destination area lists the path to any
previous backups. Specify the current backup destination as follows:
• If you are backing up the database to the same location and file name as a
previous backup, select the backup path to specify it as the destination for the
current backup. Then skip ahead to step 9 of this procedure.
NOTE: Do not store the backup file on the C: drive.
• If there are no previous backup destinations listed or you are backing up the
database to a different path than those listed, click
Add. The Select Backup
Destination dialog box opens. Continue with the next step in this procedure.
5. In the Select Backup Destination dialog box, choose
File name and click the …
button. The Locate Database Files dialog box opens.
6. In the Locate Database Files dialog box, browse to your desired location to store
your database backup. For example, you could store the database backup on the E:
To Next Page
Loading...
