EasyManuals Logo

GRAUPNER GENIUS PRO 60R for W-Lan User Manual

GRAUPNER GENIUS PRO 60R for W-Lan
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22 / 32
S3084_S3086_S3078_S3085_MP_V1
Number-pole (number of motor poles)
You set the number of motor poles here: 2 ~ 20. Set the number of
motor poles (on car motors, at least 2) so that the maximum and
average speed of the most recent operation can be displayed.
Gear ratio
Here you can set the gear ratio reduction factor 2.0:1 ~ 15.0:1. Set
the overall gear reduction ratio so that the maximum and average
speed of the most recent operation can be displayed.
Tire diameter
To set the tyre diameter here: 40 mm ~ 200 mm.
Set the tyre diameter so that the maximum and average speed of the
most recent operation can be displayed.
Bec volt (BEC voltage of the controller)
You can set the BEC voltage of the controller, 5 - 8V
ESC CutOff (cutoff temperature of the controller)
You set the maximum temperature of the controller here.
Disable (cutoff not active) / 100°C ~ 135°C On reaching the maxi-
mum set temperature, the controller cuts off.
Motor CutOff (cutoff temperature of the motor)
You set the maximum temperature of the motor here.
Disable (cutoff not active) / 100°C ~ 135°C On reaching the maxi-
mum set temperature, the controller cuts off.
Motor wiring
The motor cable sequence can be changed here if the cables are
connected twisted. (see the section "Speed controller connections"
Units
Set the units of measure for the display, Metric or English (for exam-
ple, Celsius / Fahrenheit)
Connection with the W-Lan module
The W-Lan module is connected to the speed controller, as in the
drawing in the chapter "Connection diagram". Make sure the polar-
ity of the plug is correct! For the S3084 Genius Pro 60 + W the W-Lan
module has to be connected to the telemetry cable (black / red /
white) through a Y cable (No.S8186).
When the W-Lan module is connected, no telemetry transmission
can be displayed in the transmitter display!
A detailed tutorial video can be found on our Graupner Youtube
channel. The link is available on
www.graupner.de, directly in the
page of the W-Lan module.
The required Android APP "Genius Wizard" can be found in the Goo-
gle playstore.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GRAUPNER GENIUS PRO 60R for W-Lan and is the answer not in the manual?

GRAUPNER GENIUS PRO 60R for W-Lan Specifications

General IconGeneral
BrandGRAUPNER
ModelGENIUS PRO 60R for W-Lan
CategoryController
LanguageEnglish

Related product manuals