Section 7
128 Using Bluetooth
1. Starting from the Main Screen of your Jitterbug, scroll through the options using the
“Up/Down”
button until “Settings” is highlighted in gray in the middle of the Inside
Display.
2. Press the
button on your Jitterbug to select “Settings.”
3. Scroll through the “Settings” options using the “Up/Down” button until
“Bluetooth” is highlighted in gray in the middle of the Inside Display.
4. Press the button to select the “Bluetooth” option.
5. Scroll through the “Bluetooth” options using the “Up/Down” button until
“Bluetooth OFF” is highlighted in gray in the middle of the Inside Display.
6. Press the
button to turn Bluetooth on. You will now see the words “Bluetooth
ON” highlighted in gray in the middle of the Inside Display.
7. When your Jitterbug is set to “Bluetooth ON,” you will see the Bluetooth
symbol in the top right corner of the Main Screen as shown on page 131.
To Next Page
Loading...
