GreatCall Jitterbug - Setting Your Jitterbug to Pairing Mode

Section 7
132 Using Bluetooth
Setting Your Jitterbug To Pairing Mode
1. Starting from the Main Screen of your Jitterbug, use the “Up/Down” button
and scroll until “Settings” appears highlighted in gray in the middle of the Inside
Display.
2. Press the
button on your Jitterbug to select “Settings.”
3. Use the “Up/Down”
button and scroll until “Bluetooth” appears
highlighted in gray in the middle of the Inside Display.
4. Press the
button to select the “Bluetooth” feature on your Jitterbug.
5. Use the “Up/Down”
button and scroll until “Pair” appears highlighted in
gray in the middle of the Inside Display of your Jitterbug.
6. Press the
button to select the “Pair” feature on your Jitterbug.