GreatCall Jitterbug - Powering the Jitterbug On and Off

Section 1
18 Getting Started
Turning Your Jitterbug On And Off
If you have not activated your Jitterbug, please refer to page 10 before turning
your Jitterbug on for the rst time.
IMPORTANT!
Turning Your Jitterbug On
1. Open your Jitterbug.
2. Press the
on
off
button in the upper right corner of the keypad until your Jitterbug
turns on and the GreatCall logo appears on the Inside Display.
3. When you hear a dial tone, your Jitterbug has service and is ready to use.
If a connection is not possible, a “No Service” message will appear on the
Outside Display and a dial tone will not be heard.