Speed Mode
Speedometer Setup Mode
24
This feature allow the user to set the Turbo Timer speedometer to match
the vehicle’s speedometer.
(1)While in Speed Mode, press
the P+S button to go to
Speedometer Setup mode.
(2)Get the vehicle speed up to
40km/h. Press the T button
to set the speed.
(3) When the setup is complete,
40km/h will display.
* To clear the memory, hold down
T button over 5 sec. and repeat
the procedure above.
Important! - Make sure you perform this step with a passengers help.
Have the passenger operate the Turbo Timer while the
driver concentrate on driving safely.
* There is a possibility that the vehicle’s speedometer and the actual
vehicle speed.
Press T to set
After two cycles
To Next Page
Loading...
