GReddy Full Auto Timer User Manual

Setup Mode
Line Switch Mode
26
This feature is used when the count down does not properly operate.
If the engine shuts down when the IG key is turned off with out counting,
follow these instructions.
(1) While in Setup Mode, press
the P+S button to go to Line
Switch mode.
(2) Hold down the T button for 2 sec
to change to Acc.
* Hold down the T button for 2 sec
again to change back to IG
(3) Change the switch on the back
of the head unit to Acc.
* Make sure that both of these
setting matches for proper
operation.
Default setting is
IG.
Hold down T button
for 2 sec.
Back of the head unit
AccIG

GReddy Full Auto Timer Specifications

General

Brand	GReddy
Model	Full Auto Timer
Category	Automobile Accessories
Language	English