Gree FLEXX Series User Manual

23
9.1 Air Handler Dip Switch Settings
Default
factory setting is: Low air flow setting.
"ON" side is 0, the other side is 1.
For exam
ple:
Below is the default setting of 36K: 0010 0010
24K dip swit
ch:
Low air flow setting: 0101 (HEAT) /0101 (COOL)
Mid. air flow setting: 0110 (HEAT) /0110 (COOL)
High air flow setting: 0111 (HEAT) /0111 (COOL)
36K dip switc
h:
Low air flow setting: 0010 (HEAT) /0010 (COOL)
Mid. air flow setting: 0011 (HEAT) /0011 (COOL)
High air flow setting: 0100 (HEAT) /0100 (COOL)
48K dip switc
h:
Low air flow setting: 1011 (HEAT) /1011 (COOL)
Mid. air flow setting: 1100 (HEAT) /1100 (COOL)
High air flow setting: 1101 (HEAT) /1101 (COOL)
60K dip switc
h:
Low air flow setting: 1000 (HEAT) /1000 (COOL)
Mid. air flow setting: 1001 (HEAT) /1001 (COOL)
High air flow setting: 1010 (HEAT) /1010 (COOL)

Gree FLEXX Series Specifications

General

Type	Heat Pump
Series	FLEXX
SEER	Up to 20
HSPF	Up to 10
Refrigerant	R410A
Heating Operation Range	-22°F to 75°F
Cooling Operation Range	5°F to 122°F
Operating Temperature Range (Heating)	-22°F to 75°F
Operating Temperature Range (Cooling)	5°F to 122°F
Energy Efficiency Ratio (EER)	Up to 12.5
Dimensions (Outdoor Unit)	Varies by model
Weight (Outdoor Unit)	Varies by model
Compressor Type	Inverter
Power Supply	208/230V, 1Ph, 60Hz
Noise Level	As low as 55 dB(A)