Gree FLEXX36HP230V1AO - Page 84

GREE DC INVERTER HEAT PUMP CONDENSING UNIT
81
Removal of condenser
NOTE:Before removing the condenser, make sure there is no refrigerant in the pipeline and power is cut off.
Step
Picture
Work instruction
7. Secure the electric box
and arrange the wires
according to the
requirement.
 Put the electric box in place
and tighten up the screws of
electric box.
 Arrange and secure the wires
as original.
8. Check and open the upper
and side panels.
 Check whether each
component and connection
wire is well connected.
 If everything is OK, place back
the upper, left and right side
panels.