Gree FLEXX36HP230V1AO - Page 85

GREE DC INVERTER HEAT PUMP CONDENSING UNIT
82
Model: FLEXX36HP230V1AO
Removal of electronic expansion valve
NOTE:Before removing the electronic expansion valve, make sure there is no refrigerant in the pipeline and power is cut off.
Step
Picture
Work instruction
1. Remove the
electric box.
 Remove the upper, lower
and front panels.
 Loosen the wire clamp at
the bottom of the electric
box
 Unscrew the screws of
electric box.
 The connection wires
inside and outside the
electric box should be
removed.
 When removing the
electric box, be careful to
protect the components.
2. Remove the
fixed block.
 Remove the fixed block
between the electronic
expansion valve and the
pipe.