Vertical Exposed Fan Coil Unit
18
(2) Energy saving function
The unit is allowed to cool or heat in the energy saving mode (08, 09 in the list). Energy will be saved
when the air conditioner operates within a small range by limiting the cooling and heating temperatures.
y
The sleep mode is also available upon the energy saving mode.
y
If a power failure occurs, the energy saving mode will restart upon the restoration of power.
y
If the set temperature in any other modes exceeds the limit of energy saving mode, the temperature
will be adjusted to the limit value.
As shown in the Figure 8, on the parameter setting page, press (MODE) to switch the option number
to 02. (UP) or (DOWN) is provided to allow a switch between ON and OFF.
(3) Drying function
If it is enabled while the unit is working in the cooling condition, the symbol will be displayed. Pressing
ON/OFF key to stop the unit, the interior fan will cease after 2-minute running. Then, the symbol will not
be displayed if drying is done.
The function is not available in the air supplying and heating modes. The symbol will not be displayed.
As shown in the Figure 9, on the parameter setting page, press (MODE) to switch the option number
to 03. (UP) or (DOWN) is provided to allow a switch between ON and OFF.
To Next Page
Loading...
