Gree GFH09K3FI - Page 112

109
U-Match Series DC
Inverter Service Manual
18K:
Remark : Before disassembly and assembly, make sure that the unit has been cut off from the power supply.
Step Illustration Handling Instruction
1. Remove external casing
1. Remove the top cover and handle;
2. Remove the grille, outer case and right side plate.
2. Remove motor
1. Remove the blade nut and then remove the blade;
2. Remove the motor from motor support.
3. Remove compressor
1. Discharge the refrigerant inside the pipeline
and recycle the refrigerant during discharging;
2. Unsolder the 4-way valve assy from compressor;
5HPRYHWKHQXW¿[LQJFRPSUHVVRU
4. Take away the compressor from chassis.
4. Assemble unit
Assemble the unit in the reverse
procedures of disassembly.