Gree GFH09K3FI - Page 117

114
U-Match Series DC
Inverter Service Manual
'LVDVVHPEO\RI¿OWHUVFUHHQIRUUHWXUQDLU
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts
GXULQJGLVDVVHPEO\'RQRWSXW¿OWHUVFUHHQQHDUWKHKLJKWHPSHUDWXUHKHDWVRXUFH
Step Illustration Handling Instruction
'LVDVVHPEO\RI¿OWHU
screen for return air
&RPSUHVVWKH¿OWHUVFUHHQIRUUHWXUQDLUGRZQRQWKH
guide slot sponge, and remove according to the direction
VKRZQE\WKHDUURZ7KHUHDUH¿OWHUVFUHHQIRUUHWXUQDLU
Disassembly of electrical parts box cover panel and electrical parts box
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts
during disassembly, especially the electrical components. Do not dampen or hit them
Step Illustration Handling Instruction
2. Disassembly of
electric box cover
Disassemble the screw according to the position
shown in the circle and the box and remove the
electric box in the direction of the arrow.
3. Disassembly of
electric parts box
Disassemble the fastening screw and remove the
electrical parts box. (As is shown in the graph, there
are 2 fastening screws in the circle and the screws in
the direction of arrow shall be disassembled too.)
Disassembly of water-containing plate
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step Illustration Handling Instruction
4.Disassembly of cover plate
Disassemble the fastening screws on the cover
plate and remove the cover plate. (As is shown
in the graph, circle represents 6 fastening screws
under the cover plate and the box represents
two fastening screws on water-containing plate
symmetrically arranged both on left and right.)
5.Disassembly of water-
containing plate
Disassemble the fastening screws on the water-
containing plate, pull upward and remove the
water-containing plate. Disassembled water-
containing plate is shown in the graph.