Gree GMV-120WM/B-F

GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
117
09
Discharge temperature of compressor 3
°C
This parameter is invalid for the
GMV5 series.
10
Discharge temperature of compressor 4
°C
This parameter is invalid for the
GMV5 series.
11
Discharge temperature of compressor 5
°C
This parameter is invalid for the
GMV5 series.
12
Discharge temperature of compressor 6
°C
This parameter is invalid for the
GMV5 series.
13
Operation frequency of compressor 3
Hz
This parameter is invalid for the
GMV5 series.
14
Current value of compressor 1
A
15
Current value of compressor 2
A
16
Current value of compressor 3
A
This parameter is invalid for the
GMV5 series.
17
Current value of compressor 4
A
This parameter is invalid for the
GMV series.
18
Current value of compressor 5
A
This parameter is invalid for the
GMV5 series.
19
Current value of compressor 6
A
This parameter is invalid for the
GMV5 series.
20
Reserved
21
Module temperature of compressor 1
°C
22
Module temperature of compressor 2
°C
23
Module temperature of outdoor fan 1
°C
24
Module temperature of outdoor fan 2
°C
25
Outdoor unit heating EXV1
PLS
26
Outdoor unit heating EXV2
PLS
27
Subcooler EXV
PLS
28
Defrosting temperature
°C
29
Liquid-extracting temperature of subcooler
°C
30
Outlet temperature of accumulator
°C
31
Oil return temperature
°C
This parameter is invalid for the
GMV5 series.
32
Inlet-tube temperature of condenser
°C
This parameter is invalid for the
GMV5 series.
33
Outlet temperature of condenser
°C
This parameter is invalid for the
GMV5 series.
NOTE:
① If a parameter value is negative, LED3 circularly displays the negative code "nE‖ and the numeric
value every one second. For example, for -30C, LED3 alternately displays ―nE‖ for one second
and then ―30‖ for another second.
② The discharge temperature and environment temperature are displayed as four-digit values,
circularly displaying the higher two digits and the lower two digits. For example, if "01" and "15"
are alternately displayed, it indicates 115C. If "nE", "00", and "28" are alternately displayed, it
indicates -28C.
③ If a parameter is invalid for the unit, ―00‖ is displayed.
④ If no button operations are performed on the master unit for five minutes, the function setting
automatically quits and the unit restores the current status.
Step 9: If the nb ODU bar code query is selected, the display is as follows. Enter the